Worcester Greenstar Ri Manuel de service télécharger pdf (Page 32)

FINISHING COMMISSIONING

The boiler has been factory set, so there

should be no need to adjust any controls.

1 Install bottom panel.

A The cut out in the bottom panel fits easily

over the syphon elbow and outlet, however

care should be taken not to disturb any

sealed components.

B Hook the lip at the back of the bottom panel

over the angled edge at the base of the

connections manifold.

C Gently push up into position.

 Secure in place with the two screws

supplied (D).

2 Replace outer casing.

 Replace outer casing making sure that the

securing points are properly located.

 Replace top two screws (E).

 Retighten bottom two screws (F).

HANDOVER:

 Complete the Benchmark checklist.

NOTE: The Benchmark Checklist can be

found at the rear of these instructions.

 Set up the controls and show the user how

to operate all the controls shown in the User

Guide.

 If the appliance is unused and exposed to

freezing conditions; shut off all the mains

supplies and drain the system and boiler.

FINISHING COMMISSIONING

INSTALLATION & SERVICING INSTRUCTIONS FOR WORCESTER BOSCH GREENSTAR Ri

8 716 109 699a (05/05)

COMMISSIONING

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 52 53

Pas de commentaire

Worcester Greenstar Ri Manuel de service Page 32