Worcester Greenstar Ri Manuel d'instructions télécharger pdf (Page 19)

SAFETY:

All relevant safety precautions must be undertaken.

Protective clothing, footwear, gloves and safety

goggles must be worn as appropriate.

FIXING THE MOUNTING FRAME:

• The boiler template shows the relative

positions of the flue and pipes to the boiler.

Also clearances around the appliance.

 Fix the template to the wall in the desired

position ( A ).

 Mark the clearance around the boiler and the

position of gas and system pipes ( 2 ) and

( 3 ).

 Drill 4 holes for the wall mounting plate

through the template.

 Drill 2 holes for bottom fixing screws.

 Drill hole for flue duct through the wall.

NOTE: The template has been sized

to allow for minimum clearances of

5mm sides, 200mm base and

30mm above a Ø100 flue elbow.

REAR FLUE OUTLET

• The drawing ( B ) opposite shows the boiler

template with the flue centre lines of both the

100mm and 125mm flue systems.

 Mark centre-line of flue to be used ( 1 ).

• If a Ø100mm diameter flue is to be used,

a125mm diameter hole is required. However, if

using the weather sealing collar by pushing it

through from inside the property, then a

150mm diameter hole is required to

accommodate this.

• The flue turret of the 100mm flue

has an in-built 3° angle.

If extensions are to be added then the complete

flue must rise at an angle of 3°.

• The 125mm Ø flue system will require the flue

to rise at an angle of 3°.

 Drill hole using a core drill or similar.

SIDE OUTLET:

 Mark from the centre line of the wall template

to the wall which the flue will pass through

( 4 ).

 Allow for a rise of 52mm per metre length of

flue, to give a 3° angle.

 Clear any debris from the site.

CAUTION: Ensure there are no pipes,

electric cables, damp proof courses or

other hazards before drilling.

X 6

10mm Ø

WALL MOUNTING PLATE

FLUE OPENING

127mm

COMMISSIONING

CAUTION:

Use appropriate mounting

hardware to suit boiler

weight and wall type.

INSTALLATION & SERVICING INSTRUCTIONS FOR WORCESTER GREENSTAR Ri

8 716 115 168a (06/2008)

WALL MOUNTING PLATE FLUE OPENING

INSTALLATION

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 55 56

Commentaires sur ces manuels

Pas de commentaire

Worcester Greenstar Ri Manuel d'instructions Page 19

Commentaires sur ces manuels

Produits connexes et manuels pour Chauffe-eau et chaudières Worcester Greenstar Ri